1. Unbox Your Spherea Display
Inside the box, you’ll find:
-
1 × Spherea Ord Core Memory Holder™
-
1 × LED Base
-
1 × USB Power Cable
-
1 × HD Memory Insert
-
1 × Protective Packaging
Carefully remove the protective films from the acrylic surfaces to ensure maximum clarity.
2. Connect the LED Base
-
Plug the USB cable into any power source (adapter, computer, or power bank).
-
Connect the other end to the LED base.
-
Tap the button to turn on the soft white glow.
Your memory display will illuminate instantly.
3. Insert Your Custom Memory
If your order includes a custom memory image:
-
Slide the HD memory insert into the acrylic holder from the side opening.
-
Ensure the printed side faces forward.
-
Press gently until fully seated and centered above the LED light.
If you ordered without an image, you can insert your own printed photo (recommended size: the same as your original insert).
4. Display Your Moment
Place your Spherea display on:
-
Your desk
-
Your nightstand
-
A living room shelf
-
Your gaming setup
-
Workspace or office
The LED core creates a subtle glow, making your memory stand out in any room.
5. Care & Cleaning
-
Use a soft microfiber cloth to clean dust or fingerprints.
-
Avoid chemical cleaners — they may damage the acrylic.
-
Keep away from extreme heat or direct sunlight for long periods.
6. Troubleshooting
LED not turning on?
-
Check that the USB cable is securely plugged in.
-
Try a different power source or adapter.
Insert not glowing as expected?
-
Make sure the image is fully seated above the LED opening.
-
Ensure the printed side faces forward.
Scratches or fogginess?
-
Remove protective film if still attached.
-
Wipe with a microfiber cloth.
7. Need Help?
We’re here for you.
For support or replacement parts, contact us any time